By using Proteus’ built-in pulse generators or a voltage-controlled oscillator, you can accurately model the YF-S201’s digital output across variable flow rates. For reusable designs, you can create a custom symbol that packages these primitives.
void setup() Serial.begin(9600); pinMode(2, INPUT_PULLUP); attachInterrupt(digitalPinToInterrupt(2), pulseCounter, FALLING); lastTime = millis();
pulseCount = 0; lastTime = now; attachInterrupt(digitalPinToInterrupt(2), pulseCounter, FALLING); yf-s201 proteus library
[ Flow\ Rate\ (L/min) = \fracFrequency\ (Hz)4.5 ] [ Total\ Volume\ (L) = \fracNumber\ of\ Pulses450 ]
void loop() unsigned long now = millis(); if (now - lastTime >= 1000) // Every second detachInterrupt(digitalPinToInterrupt(2)); By using Proteus’ built-in pulse generators or a
void pulseCounter() pulseCount++;
Introduction The YF-S201 is arguably the most popular water flow sensor among hobbyists, students, and engineers working on Arduino, ESP32, or STM32 projects. It is inexpensive, reasonably accurate, and easy to interface. However, when moving from physical prototyping to simulation, many developers hit a wall. It is inexpensive, reasonably accurate, and easy to
Serial.print("Flow Rate: "); Serial.print(flowRate); Serial.print(" L/min\t\tTotal: "); Serial.print(totalLiters); Serial.println(" L");