A: This indicates sensor damage or overload history. Check that the pan is seated properly. If the issue persists, the load cell is likely bent – contact Digi support.
A: Yes, using the tare function. Place an empty cup on the scale, press TARE, then pour liquid. Do not spill liquid onto the scale body. digi sm-500 scale user manual
A: The internal processor requires three consecutive identical readings within the tolerance band before displaying “STABLE”. Lightly touching the table will cause the indicator to turn off. A: This indicates sensor damage or overload history
OFF → Hold CAL → Place required weight → Wait for PASS. A: Yes, using the tare function
EEEEE → Remove weight → Restart. LO → New batteries. No display → Check polarity or adapter. This manual is intended for the Digi SM-500 series as commonly distributed. Variations may exist between production batches. Always refer to the printed guide included with your specific unit for model-specific features like Bluetooth connectivity or secondary displays.